tecnohasem.blogg.se

25 April 2022 - 05:13
Tonymaxx86 unibeast install macos sierra
Allmänt
Tonymaxx86 unibeast install macos sierra





tonymaxx86 unibeast install macos sierra
  1. #Tonymaxx86 unibeast install macos sierra mac os#
  2. #Tonymaxx86 unibeast install macos sierra update#
  3. #Tonymaxx86 unibeast install macos sierra full#
  4. #Tonymaxx86 unibeast install macos sierra series#
  5. #Tonymaxx86 unibeast install macos sierra windows#

Once the command is done you have to install Clover which can be downloaded here Please note that this part of the command “ /Volumes/Untitled” is the path to the USB key and if you have named it anything else than “Untitled” you will have to edit it with the name of your USB key. Sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia -volume /Volumes/Untitled -applicationpath /Applications/Install\ macOS\ Sierra.app Then open terminal and run this command to create the USB key I just named the USB Key Untitled as standard

#Tonymaxx86 unibeast install macos sierra mac os#

Run Disk Utility and format the USB key as Mac OS Extended (Journaled) with GUID Partition Map. Security > Device Security (Everything to “Device Available” except these)ĭownload the Mac OS Sierra installer app from the Appstore on a working computer running Mac

tonymaxx86 unibeast install macos sierra

Please keep in mind that there might be option you can turn on or off depending on your need but this is just what worked for me. Setup the BIOS settings with the following settings.

#Tonymaxx86 unibeast install macos sierra windows#

The easiest way is to run the flash tool on a Windows installation.

#Tonymaxx86 unibeast install macos sierra update#

Update your BIOS to the latest (currently it is 3.60 Rev.A )

#Tonymaxx86 unibeast install macos sierra series#

The HP Z series is very powerful and affordable computers which I simply think is a brilliant Hackintosh solution. I am not sure who to credit for the kexts but a big THANK YOU to whoever you are! With a bit more detail on the BIOS settingsĪll credit really goes to: chatdeau, Rockey12 and ZoroZZ for helping out and creating the first topic on the HP Z series found here Make an mount point for your EFI partition and mount it.I am basically making this more current and simplifying it for people with HP Z800 wanting to run Sierra. The SSD is marked *240.1 GB so the EFI partition on my SSD is /dev/disk0s1, yours may vary. Obviously my USB is the one marked *31.0 GB which is /dev/disk2. Look at the SIZE of the GUID_partition_scheme this will help you find your hard drive or SSD. Note that this shows two EFI partitions, one is on my USB stick the other is my SSD. Wifi & BT - Broadcom BCM94352ZĢ: Apple_APFS Container disk1 239.8 GB disk0s2Ġ: APFS Container Scheme - +239.8 GB disk1ġ: APFS Volume HackintoshSystem 20.7 GB disk1s1 You may reboot here or continue on to install the Wifi & BT kexts. This will automatically configure it for you. Open MultiBeast and then click the Load option and open the file, then click Build. I generally copy MultiBeast into my Applications. First BootĪfter first boot, open the USB stick. The standard Welcome screen should appear and you complete as normal. Again it'll show the Apple with the loading bar. Post InstallĪgain boot from the USB, when Clover loads select the option for Boot macOS from Hackintosh HD. The install will complete and you can restart the system. After reboot, again select Boot macOS install from Hackintosh HD. This will go for a minute or so, then the machine will reboot. This will bring up an Apple with a loading bar, then it'll show Installing on "Hackintosh HD" and About 18 minutes remaining. InstallĬlover will load, select the drive with the description Boot macOS install from Hackintosh HD.

tonymaxx86 unibeast install macos sierra

Select Install macOS, then the rest of the install should be obvious. Bootīoot the system from the USB stick which you created. On your host machine, use Unibeast to create a UEFI USB installer.Ĭopy the BCM94352Z_Patch and and MultiBeast on to the USB stick. Peripherals Tab Trusted Computing Section Let it complete the flash process and you're done. It may ask your language, the goal is to exit the installer and "Return to DOS". Insert it into your GA-H110MSTX-HD3 and boot from it. Unzip the file, it should contain three files: autoexec.bat, Efiflash.exe, H110MSH3.F25Ĭreate a new folder on your FreeDOS USB stick called BIOS and copy those files into it.Įject and remove the stick from your mac. You should have downloaded mb_bios_ga-h110mstx-hd3_f25.zip from Gigabyte. =Do not power off while it is flashing or you'll brick your motherboard.=

  • Click Select Drive and select your USB stick.
  • Click Select Image and select the FreeDOS img file.
  • Unetbootin is loaded up with spyware now, so get yourself a copy of Etcher.
  • Unzip the file from FreeDOS, you only need the img file: FD12LITE.img or FD12FULL.img.

    • #Tonymaxx86 unibeast install macos sierra full#

  • Download a FreeDOS USB stick ISO full or lite doesn't really matter.
    • You'll need a USB stick, size doesn't really matter, it should be bigger than 50 MB. Update the BIOS to the latest first as of this writing it was F25, the board shipped with F1.
  • Patriot Signature Line 2x8GB (PSD38G1333SK).
  • Intel i5-7500T Kaby Lake - HD Graphics 630.
    • High Sierra Hackintosh Gigabyte GA-H110MSTX-HD3 Build Specifications







    Tonymaxx86 unibeast install macos sierra
    0 kommentar(er)
    Om Mig: